Here is a step by step Procedure:
1 Start or restart the HP server.
2 At boot time, press F8 to enter the Integrated Lights-Out 2 setup.
3 Provide credentials at the login prompt.
4 Press Ctrl+S to open the Intel Boot Agent Setup Menu.
5 Press F8 to open the ROM Array Configuration menu.
The Main Menu appears.
6 From the Main Menu, select Create Logical Drive and press Enter.
7 Select all physical disks under Available Physical Drives.
8 Select an appropriate RAID level under RAID Configurations.
VMware recommends that you use RAID 5, 6, or 10.
9 Press Esc.
The HP RAID controller creates the RAID logical drive.
No comments:
Post a Comment